Uluslararası %100 Yenilenebilir Enerji Konferansı

ŞENER OKTİK

Kadir Has Üniversitesi Öğretim Üyesi, Şişecam Yönetim Kurulu Üyesi, GENSED Onursal Başkanı
porno türk porno full hd porno

ŞENER OKTİK

Kadir Has Üniversitesi Öğretim Üyesi, Şişecam Yönetim Kurulu Üyesi, GENSED Onursal Başkanı

Photovoltaic Module Recycling Quo Vadis?

 

Abstract

It is widely accepted that Photovoltaics Power Systems, PVPS are becoming a game changer in global electrical energy production portfolios. Through the last decade, the average “Compound Annual Growth Rate (CAGR)” of photovoltaic market estimated to be over 30% and by the end of 2020, cumulative installed PV power capacity surpassed   ̴ 650 GWp and more than 150GWp new installation is forecasted during 2021.

The investment costs of PV power plants has been steadily decreasing by an average of about 13 % per year since 2016 due to  technological progress and exponential growth in production capacity  of every components in the PVPS value chain.  The most of PVPS components  are designed and manufactured to perform reliably in the field over 20 years, on the other hand  the ~65% of  global installed PV capacity has been in the field for only about five years. It is projected that the size of  waste generated by aged or/and defective components will grow significantly in the near future thus  a recycling concerns of PVPS components are becoming an issue for academia, PV industry and the end user. However, the current low volume of components to be recycled, quality of recycled materials, efficiency of recycling process and cost of infra structure seem to hinder the speed of developments in PV recycling technologies. PVPS recycling covers a large spectrum of components  from PV module waste, electrical/electronic equipment waste, battery waste, industrial waste, packaging waste and to address all is beyond the spectrum of review. This work is focused on recent progresses related to recycling technologies for components of crystalline and thin film PV modules and reclaiming the components to be used in  module manufacturing.

 

Biyografi

(65) Ankara Üniversitesi’nden 1976 yılında “Fizikçi” ve 1977 yılında uygulamalı fizik alanında “Fizik Yüksek Mühendisi” olarak mezun olmuş, 1982 yılında Durham Üniversitesi (İngiltere), Uygulamalı Fizik ve Elektronik Bölümü’nden Doktora derecesini ve ardından uygulamalı katıhal fiziği alanında 1986 yılında Doçent ve 1995 yılında Profesör unvanlarını almıştır. Akademik kariyerinde öğretim üyesi, araştırmacı, kıdemli uzman araştırmacı ve yönetici, üst düzey yönetici olarak, uluslararası kurumlarda  (İngiltere’de Durham Üniversitesi, İtalya’da Lecce Üniversitesi, Almanya’da Stuttgart Üniversitesi) ve ulusal kurumlarda ( Selçuk Üniversitesi,  Muğla Sıtkı Koçman Üniversitesi) görev yapmıştır. Prof. Oktik, 2002-2010 yılları arasında Muğla Üniversitesi “üçüncü ve dördüncü dönem rektörlük” görevini yürütmüştür. Endüstride, kıdemli uzman bilim insanı, kıdemli uzman teknolog ve üst düzey yönetici olarak, uluslararası (İngiterede’de;  BP Solar Sunbury, Imperial Chemical Industries PLC Paints Division Slough, Industrial Research Labs of Durham University, Almanya’da; Center for Solar Energy and Hydrogen Research Baden-Württemberg (ZSW))  ve ulusal (Anel Grup, Arıkanlı Holding ve Şişecam) araştırma ve teknolojik geliştirme laboratuvarlarında görevler üstlenmiştir.  Prof. Oktik kariyeri sürecinde çok sayıda mesleki ve sivil toplum örgütünde görev almıştır, sürdürmekte olduğu uluslararası üyelikler ve görevler; International Commission on Glass, “ICG”, Üyeliği, International Conference on Coatings on Glass and Plastics(ICCG), Society of Vacuum Coaters (SVC), “The Center for Functional and Surface Functionalized Glass (FunGlass) “Danışma Kurulu Üyeliği”, “European Photovoltaic Solar Energy Conference EU-PVSEC” da Bilim Kurulu Üyeliği,  the European Physical Society (EPS) Türkiye temsilciliği, ulusal üyelikler ve görevler Güneş Enerjisi Sanayicileri ve Endüstrisi Derneği” Onursal Başkanlığı, Türkiye Temiz Enerji Vakfı Üst Kurul Üyeliği, Sıtkı Koçman Vakfı ve Türkiye Temel Bilimler Araştırma Vakfı Mütevelli Heyeti üyeliği, Bilim, Teknoloji ve Yenilik Politikaları Kurulu (BTYPK) Danışma Kurulu üyelikleridir.

Alanında sayıları yüzü aşan ulusal ve uluslararası makalenin ve iki dünya patentinin yazarı/ortak yazarı olan  Prof. Oktik,  halen Kadir Has Üniversitesi Öğretim üyesi olarak görev yapmakta olup, 27 Mart 2020 tarihinde gerçekleştirilen Ortaklar Olağan Genel Kurul Toplantısı’nda Türkiye Şişe ve Cam Fabrikaları A.Ş. Yönetim Kurulu Üyeliğine seçilmiştir.